Antique Copper Border Trim Liner Tile (EMT_TB500-COP-AT) Backsplash & Wall
Antique Copper Border Trim Liner Tile (EMT_TB500-COP-AT) Backsplash & Wall
Antique Copper Border Trim Liner Tile (EMT_TB500-COP-AT) Backsplash & Wall

Antique Copper Border Trim Liner Tile 1" (EMT_TB500-COP-AT) Backsplash & Wall

Regular price $16.00
/

Size
Only 95 items in stock!

This flat copper border liner is typically used to frame or finish a copper wall tile installation.

Each piece is 1" wide by 11.75" long (8 mm thick) and is made with a real piece of copper that has an antique finish to match most of our copper tiles.

Please note the copper cap fully covers all sides of the liner (see close-up photo).

This copper trim border tile is ideal for copper kitchen backsplash, accent wall, fireplace surround, tub surround, bathroom wall, and bath backsplash wall projects.

  • Model Number / SKU: EMT_TB500-COP-AT
  • Material: Copper - Antique Finish
  • Square Feet / Sheet: 0.08 sqft.
  • Sheet Size: 11.75"x 1.0" (8 mm thick)
  • Mounted On Mesh Sheet:¬†No
  • Grout Required:¬†Yes - Non-sanded or epoxy grout
  • Ships From:¬†OH, USA
  • Applications:¬†Residential, Commercial, Industrial

Please note we do not offer samples of this copper border trim tile.

This copper mosaic border tile is comprised of a real copper "cap" attached to a ceramic backing. This provides two obvious advantages, the first being cost. Solid metal mosaic pieces would significantly increase the cost of the tile to an unattainable amount. Secondly, it would be very hard to cut a solid 8mm thick piece of copper.

To find out how many border edge tiles you would need to create a finished edge, add up all the side lengths you would like to border tile (in inches), divide the number by 11.75 (since each piece is 11.75" in length) and round it up to the next whole number to get the total number of border edge tiles your project would require. We also recommend ordering 10% more tile than calculated to account for errors, miscuts and overages.

For example, if you would like to border tile a rectangular area of 40" x 24", the total side lengths would be 40"+24"+40"+24"=128".

We suggest you then add 10% for the overages. You would then get 140.8".

Divide 140.8" by 11.75 = 11.98".

Round that number up and you get to 12 border edge tiles which would be needed to border tile a rectangular area of 40" x 24".

Please note dimensions for the border liner is approximate.

For installation and grouting instructions, please click here.